Seri LJ-V7000
All types of measurements are possible with this single device
With 13 types of measurement details and 7 types of measurement target specifications, this single device can handle a total of 74 types of measurements. This single device achieves the measurement of a wide variety of target and responds to customer demands without missing a beat.
Measures the height of specified points.
Makes a comparison with the registered master shape and then measures the area with the largest difference in height.
Measures the height difference from a reference point to a specified point.
Measures the radius of curved shapes.
Measures the coordinates/amount of movement for the specified position.
Measures the thickness of specified points. (When using 2 heads)
Measures the width of specified points.
Measures the angle between two specified lines or the angle from a single horizontal line.
Measures the coordinate of the centre position for a specified point.
Measures the cross-section area from a reference line or master shape.
Measures the distance between 2 points.
Calculates multiple measurement results.
Measures the distance from a reference line to a specified point.
Any 16 points can be measured simultaneously with a measurement mode that has been selected from the 74 types that are available. Simultaneously completes measurements and inspections that were considered to be a lost cause until now.
Equipped with an easy 3D measurement function for height, height differences, and position. Not only is it possible to measure 2D cross-section profiles but it is also possible to easily measure scanned 3D data of the target.
Dukungan untuk Anda